【2000w Power Continuous】Modified Sine Wave Inverter converts DC 12volt to AC 120volt .Provides 100% real 2000 watt continuous power,up to 4000 watt peak power, coming with 3 AC outlets and 2x2.4A USB ports,18-Months Warranty can refund or new replaced inverter.Product liability insurance is covered by AIG
【More Widely Used】Features 3AC 110-120V Outlets and DC 5V 2.4A 2* USB Port, auto detects and fast charges ,which can power most of your USB compatible devices,also suitable for powering larger devices such as home appliances,power tools.
LCD Display And Remote Controller】Coming with a LCD Display and 15 ft Remote Control ( 30ft cables for selling), which easy for us to know the input ,output voltage,and protection indication displayed on LCD,so that we know the using status inverter,also more convenience for us to control inverter on/off far away.
【Soft Start and Protection】Soft Start tech and Isolated Input/Output design and Full Safety protections: over voltage, overload, under-voltage, overheating, short circuit protection .Strong and Durable aluminum alloy housing provides advanced protection from drops and bumps. Integrated cooling fan only works exceed 600W, save power and keep silence.The inverter running safely and effectively at a low temperature to avoid overheat.
【What You Will Get】A 2000w modified sine wave power inverter,a 15ft remote controller, a instruction manual,2 x Cables,a friendly and patient customer after-service.18-Months Warranty, can choose refund or new replace inverter.
Item Dimensions LxWxH
15.9 x 7.8 x 6.5 inches
Output Wave: Modified Sine Wave
Over load protection:2000watts~2400watts
Efficiency: up to 90%
No load current:1.8A
Input Voltage: 9.5-16VDC
Output Voltage: 120VAC±10%
Over-temperature Protection: Around 149℉
Over-voltage Shutdown: 16V±0.5VDC
Under-voltage Alarm: 9.8V±0.5VDC
Under-voltage Shutdown: 9.5V±0.5VDC
Built-in intelligent cooling fan: Will run automatically when the temperature reaches 104℉ or load power is more than 40% of rated power.
For the 2000W 12V inverter, we suggest you use a 200Ah battery to power the loads.
About test the output AC voltage:Please note that the output power in modified sine wave inverter should be measured by TRUE RMS Multimeter, if used a normal tester meter you will get a wrong output voltage .
Note that this inverter can work with most non-inductive loads less than 2000Watts,but for some inductive loads with coil winding like:refrigerator,air-conditioner, microwave oven,electric skilletsand so on,their instantaneous power in startup phase is 4-7 times bigger as it’s working power.It will be likely to be overloaded.
Connect the inverter to a 12V battery with the standard cables provided with product, and plug your AC devices into the inverter.
Please do not leave the power inverter in the ON position while your car is off.Disconnect the positive battery terminal before doing any wiring to the inverter.
Do not put the inverter into sunlight directly, keep it in cool and dry environment.
Don’t use the inverter with a product that draws a higher wattage the inverter can provide, as this may cause damage to the inverter and product.